First layer settings by material
Quick answer
Bed temperature, surface and adhesive for every common filament. There are 8 tables in this set, each one worked through for a specific combination.
- 3D printing
PLA first layer: bed, surface and adhesive
PLA sticks best to smooth or textured pei at a bed temperature of about 60 C. No adhesive is needed on a clean plate....
- 3D printing
PETG first layer: bed, surface and adhesive
PETG sticks best to textured pei or glass at a bed temperature of about 80 C. Use glue stick as a release agent, petg bonds to bare pei...
- 3D printing
ABS first layer: bed, surface and adhesive
ABS sticks best to smooth pei or glass at a bed temperature of about 100 C. Use abs slurry or glue stick....
- 3D printing
ASA first layer: bed, surface and adhesive
ASA sticks best to smooth pei or glass at a bed temperature of about 100 C. Use glue stick....
- 3D printing
TPU (95A) first layer: bed, surface and adhesive
TPU (95A) sticks best to textured pei at a bed temperature of about 50 C. No adhesive is needed on a clean plate....
- 3D printing
Nylon (PA) first layer: bed, surface and adhesive
Nylon (PA) sticks best to garolite or pei at a bed temperature of about 80 C. Use glue stick....
- 3D printing
Polycarbonate first layer: bed, surface and adhesive
Polycarbonate sticks best to smooth pei at a bed temperature of about 110 C. Use glue stick....
- 3D printing
PETG-CF first layer: bed, surface and adhesive
PETG-CF sticks best to textured pei at a bed temperature of about 80 C. Use glue stick as release....